How can I know whether I am working with the classic assessment mode or with the ISO mode? How can I change it?

With the Ergo/IBV application, it is possible to configure the application to work with the classic assessment mode or the ISO mode.

To find out the mode in which the application is configured, you can create a new task and look at the names of the modules to be selected: if the [ISO] label appears after some of the modules that have the ISO mode option, such as the Single MMH or Office, it means that the application is configured in the ISO mode; if they do not have this label, it is because you are working in the classic mode.

NuevaTarea 18 en

Figure 1. New Task Window: Classic mode (ISO mode disabled)

You can also check the assessment mode configured by accessing Ergo/IBV Menu ->  Utilities -> Configure from the application; the Ergo/IBV Configuration window will appear: if the ISO mode box is activated, this means that the application is configured in the ISO mode; if it is not activated, the application is configured in the classic mode.

ConfiguracionISO 17 en

Figure 2. Ergo/IBV configuration window

If you want to change the operating mode, check this box if you want to work in the ISO mode, or uncheck it if you want to work in the classic mode, and then press the "OK" button.

If you activate the ISO mode, bear in mind that you will only be able to open the tasks created in this mode.

FOR FURTHER INFORMATION, SEE THE FAQ

o   What does the option to perform assessments according to the ISO standards mean?