Comunidad de Salud Laboral

Please select your question category

Search FAQs

Uso del Ergo/IBV: VÍDEOS DE MANEJO DE LOS MÓDULO

Guía rápida de uso de todos los módulos del software Ergo/IBV y de la APP Ergo/IBV Tool

Ergo/IBV Use: METHODOLOGIES

FAQs about the use of the different modules of Ergo/IBV to analyze work tasks

Module of Anthropometric design of the workstation – On which type of tasks is this module applied?

Module of Anthropometric design of the workstation – Can I obtain design recommendations without measuring the worker?

Can an overall risk level be obtained for a worker who combines Manual Materials Handling tasks with repetitive tasks?

Single and Multiple MMH – How is the frequency value calculated in a load lifting task?

Single and Multiple MMH – How are the initial force and the sustained force determined in a load pushing or pulling task?

Single and Multiple MMH – Can a risk index specific for women be considered in this type of tasks

Single and Multiple MMH – Can carrying be analyzed as a single task of Manual Materials Handling?

Single and Multiple MMH – Can multiple tasks consisting of load lifting and pushing be analyzed?

Variable MMH – In a load lifting task with variable handling conditions, when would it be advisable to apply the Variable MMH module instead of the Multiple MMH?

Variable MMH – How are weight categories established in this module?

Sequential MMH – On which type of tasks is this module applied?

Sequential MMH – Is it possible to perform a redesign with this module?

MMH – How is FREQUENCY determined in a Manual Materials Handling?

Injured MMH – What is the scope of application of this module? To what kind of injuries is it applied?

Injured MMH – In a manual load lifting task with more than one handling condition, how is risk analyzed?

Repetitive tasks – What does neutral position mean in this module?

Repetitive tasks – How can rotations be considered in this module?

EN 1005-5 [OCRA] Multitask – What is the difference between the scope of application of this module and that of the Repetitive Tasks module?

EN 1005-5 [OCRA] Multitask – In this module, what is the difference between the concept of non-repetitive work and the concept of recovery?

Postures [OWAS] – In this module, what are subtasks considered for?

Postures [OWAS] – Is a task risk level calculated in this module?

Postures [REBA] – What is the difference between the scope of application of this module and that of the Postures [OWAS] module?

Postures [REBA] – Is a task risk level calculated in this module?

EN 1005-3 [Forces] – Which is the scope of application of this module?

EN 1005-3 [Forces] – How is the actually exerted force obtained (F0)?

Office – To which type of tasks is this module applied?

Office – Is a task risk level calculated in this module?

ErgoMater – Can this module be applied to any type of pregnancy?

ErgoMater – From which point in pregnancy is this module applied?

What is the possibility to perform assessments according to ISO standards criteria?

MPH-MAPO - Which is the scope of application of MPH-MAPO in Ergo/IBV?

MPH-MAPO - What it is referred to as PC (Partially Cooperative) and NC (Non Cooperative)?

MPH-MAPO - What it is referred to as minor aids?

ErgoCheck - When is it convenient to use the ErgoCheck checklist?

ErgoCheck or the Module selection wizard. When to use each one?

OCRA – Multitask

How can I arrange the assessments performed with Ergo/IBV v18?

ERGO +50 – Which is the scope of the ERGO+50 module?

ERGO +50 - It is mandatory to fulfil all the module’s questionnaires to obtain results?

ERGO +50 - If I complete the analysis with ERGO +50, do I need to use other modules, or is this enough?

Posturas [OWAS] - ¿Qué tipo de riesgo puede obtenerse en la aplicación del método OWAS?

¿Cuál es el campo de aplicación del módulo EVALUACIÓN POST-COVID?

Ergo/IBV Use: TECHNICAL SUPPORT

How can I get the Ergo/IBV software?

What is the Ergo/IBV DEMO application?

What is the Ergo/IBV software license?

What are the system requirements to install the Ergo/IBV application on my computer/PC?

Which possible configurations can I select when installing the Ergo/IBV application?

How is the Ergo/IBV application installed?

How is a new Ergo/IBV license automatically activated?

How is a new license manually activated with Ergo/IBV?

Can I activate a software license on a virtual machine or virtual server?

How can I know which Ergo/IBV version I am running?

How can I know which Ergo/IBV license I am using?

How can I know on which computer of my Company is the purchased software license activated, which version and how many simultaneous uses it has?

Can the activated software license be changed from one computer to another? What should I do if I activated the license by mistake in the wrong computer? Do I have to unregister the computer with the activated license, etc.?

How can increase the number of simultaneous uses of the license or the number of optional modules I have?

If the computer on which the Ergo/IBV application is installed is not in the same local area network (LAN) as the computer on which the software license is activated, what are the options to work with the purchased commercial license?

To activate a license on a computer, is it necessary to have an Internet connection?

Is it possible to use Ergo/IBV in a server farm or server cluster?

If a PC does not detect the license already activated on another PC or server of the same company, what could be the problem?

Which data are included in the generated .c2v file that is sent to the IBV?

How is the software license driver manually installed with Ergo/IBV?

How is the software license manually updated with Ergo/IBV?

I cannot see assessments that were previously performed with Ergo/IBV. How can I retrieve them?

I am going to change my computer, which files contain the assessments performed and should therefore be located from the new computer with the Ergo/IBV installed?

How can I change the logo that appears on the assessment reports?

How can I change the company name that appears on the assessment reports?

I try to watch a video, but it is not possible from any of the modules, a message that “No video source configured. Select the source you use… ” appears

I have no internet access. How can I see the user manual?

I would like to have paper copies of the questionnaires and then enter the data into the Ergo/IBV software. How can I get them?

When generating a report in a module I cannot change the printer, or adjust settings such as color/black and white…

How is the software license driver manually uninstalled with Ergo/IBV?

Where are the assessments performed with Ergo/IBV saved?

I have the Ergo/IBV DEMO application, how can I upgrade to the commercial version Ergo/IBV?

How can I know the characteristics of the Ergo/IBV commercial license being used?

If I encounter a new technical problem with the Ergo/IBV application, how can I contact the IBV?

How can I know whether I am working with the classic assessment mode or with the ISO mode? How can I change it?

Ergo/IBV Update

How to update the Ergo/IBV application to the latest version in force, depending on the version you have installed.

I have the Ergo/IBV application v15, v16 or v17. How can I upgrade to the v18 version?

WHEN INSTALLING the Ergo/IBV application the following message appears…

How to proceed with messages that appear when installing the Ergo/IBV application

"You must log in as an administrator to install this software”

"HASP LM Server running. First, stop HASP LM server by running net stop "HASP Loader" from a command prompt…”

WHEN ACTIVATING the new software license the following message appears…

How to proceed with messages that appear when activating the new Ergo/IBV software license

“An error occurred when activating the license: The remote server returned an error: (407) Proxy Authentication Required"

“An error occur when activating the license: Error creating C2V – LocalCommErr”

WHEN UPDATING the software license, the following message appears…

How to proceed with messages that occur when updating the Ergo/IBV software license already activated

“An error occurred when activating the license: Error writing v2c – InvalidUpdateData”

“Key with specific ID was not found”

“Error writing v2c - Invalid Parameter” or “.v2c is invalid”

“An error occurred when updating the license: Error writing v2c – UpdateTooOld”

“An error occurred when updating the license: Error writing v2c – UpdateTooNew”

“Unable to read the specified .v2c file”

WHEN RUNNING Ergo/IBV, the following message appears …

How to proceed with messages that appear when running Ergo/IBV

“It is not currently possible to access ergo.ibv.org. Check your internet connection” on the left side of the screen

“The license of Ergo/IBV version xx you are using is a DEMO. There are "x" trial days left"

“All the licenses are in use”

“Detection error (F11): CloneDetected”

“Your company name and the serial number of ERGO/IBV are not correctly configured on the license you are using”

When I try to run Ergo/IBV, it suddenly closes …

"Error HASP: Error de detección (F3): LocalCommErr"

No Ergo/IBV license has been detected; if you have a commercial license, you can activate it now. Do you want to activate a commercial license?